Contents 1. Introduction Bluetooth wireless technology 2. Get started Overview Chargers and batteries Switch the headset on or off Pair the headset with the compatible phone Disconnect the headset from the phone Reconnect the paired headset to your phone Troubleshooting 3. Basic use Call handing 4. Battery information 5.
1. Introduction The Bluetooth headset BH95 allows you freedom to make and receive calls while on the move or in the office, You can connect the headset to a compatible phone that supports Bluetooth wireless technology. Read this user guide carefully before using the headset .Read also the user guide for your phone, which provides important safety and maintenance information. Keep the headset out of reach of small children.
Answer/end key (1) Indicator light (2). Charger connector (3) Earphone (4) Earhook(5) Microphone (6) Before you can start using the headset, you must charge the battery and pair the headset with a compatible phone. Note: Parts of the headset are magnetic, Metallic materials may be attracted to the headset .Do not place credit cards or other magnetic storage media near the headset, because information stored on them may be erased .
. Select the headset (BH95) from the list of found devices. 5. Enter the passcode 0000 to pair and connect the headset to your phone. In some phones you may need to make the connection separately after pairing. See the user guide of your phone for details. You only need to pair the headset with your phone once. 6. If the pairing is successful, the headset’s blue light will flash 3 times briefly for the first time follow by a single flash every 7 seconds.
phone. To answer a call, press the answer/end key, or use the phone keys. If the automatic answer function is set on, the phone automatically answers the incoming call after one ring. To end a call, press the answer/end key, or use the phone keys. 4. Battery information Your device is powered by a rechargeable battery. The full performance of a new battery is achieved only after two or three complete charge and discharge cycles.
protect your warranty coverage. · Keep all accessories and enhancements out of the reach of small children. · Keep the device dry. Precipitation, humidity, and all types of liquids or moisture can contain minerals that will corrode electronic circuits. If your device does get wet, allow it to dry completely. · Do not use or store the device in dusty, dirty areas. Its moving parts and electronic components can be damaged. · Do not store the device in hot areas.
FCC Information This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received; including interference that may cause undesired operation. Federal Communications Commission (FCC) Statement This Equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules.