User's Manual

ManualsBrandsCyber Blue ManualsCamera & PhotoIP CAMERA

IP CAM User Manual

Introduction and Statement

 Welcome to use the IP CAM. IP CAM contains two parts, webcam and smartphone client software,

both required supporting to achieve the IP CAM functions. Before operating the webcam, please

first read operating instruction and safety information in this manual to ensure safe and proper use.

For the use of smart phone client software, please refer to Introduction, User Agreement, and the

Privacy Protection white paper.

 Please use the factory supplied accessories to avoid unexpected damage, if you do not follow the

correct procedure to use this product or connect incompatible accessories, this behavior will

causewarranty automatically invalid and may even endanger the safety of you and others. In this

regard, ourcompany does not assume any responsibility.

 If you remove or tamper with the product casing, the product will losewarranty eligibility.

 Whether the product features can be achieved depends on the webcam system, Wi-Fi network, the

cloud service system, the computer system…etc. The functions of this product can be performed

properly only when network is unobstructed. Our company and manufacturers will not assume any

responsibility for any loss arising from service interruptions caused by network failure or any

other force majeure.

 The use of this product needs the support of the network. Costs associated with the opening of the

network are charged by telecom operators.

 With the principle of continuous improvement and continuous development, our company reserves

the right to make changes and improvements for any of the products described in this document

without prior notice.

 The contents of this manual are provided according to the situation when products are

manufactured. Unless otherwise provided by applicable law, any type of explicit or implied

warranties will not be made for the accuracy, reliability, and content of the document.

 The contents of this manual are subject to copyright protection laws and regulations. Without the

prior written permission made by our company, any form of copying, transmission, distribution,

and storage of any content in this manualis prohibited.

 Within the maximum extent permission applicable in the law, in any case, our company and

manufacturers will not take responsibility for any special, incidental, consequential, or indirect

damages, no matter what reasons cause the loss.

Summary of content (6 pages)

PAGE 1
IP CAM User Manual Introduction and Statement Welcome to use the IP CAM. IP CAM contains two parts, webcam and smartphone client software, both required supporting to achieve the IP CAM functions. Before operating the webcam, please first read operating instruction and safety information in this manual to ensure safe and proper use. For the use of smart phone client software, please refer to Introduction, User Agreement, and the Privacy Protection white paper.
PAGE 2
Frequently Asked Questions 1. What are the features of the IP CAM? IP CAM is thewebcam by using Wi-Fi networking without needing to connect the compute. With it, you can anywhere see everything at home. 1) Real-time watching 2) Two-way voice conversation 3) Alarm notification 4) Cloud video 2. How is the webcam installed? Turn on the power of the webcam, download the installation app, and open the IP CAM app to connect the configuration webcam.
PAGE 3
Any radio transmitting equipment (including the product) is likely to cause interference in the features of inadequately protected medical devices. If you have any problem or are uncertain to whether medical equipment can shield external RF energy, ask your doctor or medical device manufacturers for advice. Pacemakers: When you turn on the product, the distance between the product and the pacemaker should always be kept greater than 15.3 centimeters (about 6 inches).
PAGE 4
situations. Do not allow children to charge the webcam alone or contact charging socket to prevent the risk of electric shock. Note of the use of the power adapter Power Adapter should be installednear the product and should be easily accessible. When not using the product, please disconnect the connection between this product and thepower adapter and unplug the power adapter from the power outlet.
PAGE 5
IR: Auto IR Night Vision Function Status Description of Content of Harmful Substances Toxic and Hazardous Host Component Name Accessories Substances and Elements Lead (Pb) Mercury (Hg) Cadmium (Cd) Hexavalent chromium (Cr (VI)) Polybrominated biphenyls (PBB) × ○ ○ ○ ○ ○ × ○ ○ ○ ○ ○ Polybrominateddiphenyl ethers (PBDE) Note 1: The lead content of the small amount of the patch electronic components for special purpose in the host, chargers, power lines (such as high voltage resistors, ceramic resistors,
PAGE 6
cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.