User's Manual

Note: Parts of the headset are magnetic, Metallic materials may be
attracted to the headset .Do not place credit cards or other magnetic
storage media near the headset, because information stored on them
may be erased .
Charge and batteries
Your headset uses a rechargeable battery. You must charge the
battery fully before using the headset for the first time.
Simply plug in provided USB cable to USB port then to USB Car
Charger Adaptor / Notebook Computer / Desktop Computer. Headset
will start charging. The red indicator of headset will turn on when
charging. When the battery is full, the red indicator of the headset
will turn off.
1) Charge the headset until the red light on the headset turn off.
2) The headset will be fully charged in approximately 1 hour.
3) Remove the USB cable from the charging socket. .
The fully charged battery has power for up to 4 hours of talk-time or
up to 200 hours of standby time. However, the talk and standby
times may vary when used with different mobile phones, products
that use a Bluetooth connection, usage settings, usage styles, and
environments.
When the battery is running out of power, the red indicator light
starts to flash.
Switch the headset on or off
To switch on, press and hold the power key for 3 seconds. The blue
indicator light starts to flash.
To switch off, press and hold the power key for 4 seconds until
headset beeps 2 times and the red indicator light is displayed briefly.
Pair the headset with a compatible phone
1. make sure your headset is turn off
2. push the answer key for 8 second until the blue and red light
flashes alternately
3. Activate the Bluetooth feature on the phone, and set the phone to
search for Bluetooth devices. See the user guide of your phone
for instructions.
4. Select the headset (EM700) from the list of found devices.
5. Enter the passcode 0000 to pair and connect the headset to your
phone. In some phones you may need to make the connection
separately after pairing. See the user guide of your phone for