User manual

Once all messages are acknowledged the new message
indication display will not be shown. Any new messages will
overwrite the oldest message that is present.
Erasing Messages
To completely remove a message from memory, press the
force key while viewing the message.
PANIC ALARM
The EliteSuite™ system can provide three panic alarms that
can immediately generate an alarm after simultaneously
pressing and holding two specific buttons for three seconds.
Based on your needs, these panic alarms can generate
audible alarms (sirens or bells) or silent alarms and can
communicate specific messages to your monitoring station
or property manager.
Press & hold keys and for the panic alarm.
Press & hold keys and for a medical alarm.
Press & hold keys and for a fire alarm.
All Panic Alarm activations MUST be enabled
by your property manager or installation
company. Please refer to the system
configuration table on page
27.
FIRE ALARM
When a fire alarm occurs, the EliteSuite™ will emit three
audible tones at 2 second intervals until reset by entering a
valid user code. If the zone is a delay fire zone, there is a
delay of thirty seconds before the system contacts the
security company or property manager.
EliteSuite™ User Manual
24