User manual

FIRE ALARM
When a fire alarm occurs, the EliteSuite™ will emit three
audible tones at 2 second intervals until reset by entering a
valid user code. If the zone is a delay fire zone, there is a
delay of thirty seconds before the system contacts the
security company or property manager.
A delayed fire zone will prevent unnecessary reporting of
false alarms allowing you to reset the fire alarm before a
report is sent. If there is no fire condition, contact your
property manager or security company immediately to
avoid an unnecessary response.
A delayed fire zone will automatically cancel if the smoke
detector is reset within 30 seconds. Pressing any key on the
keypad during the first 30 seconds will silence the alarm for
90 seconds.
Fire Alarm functions MUST be enabled by
your property manager or installation
company. Please refer to the system
configuration table on page
25.
EliteSuite™ LED Keypad User Manual
24