Installation manual

9 CYB-KLED CyberSuite Installation Manual
Slave Keypad Network
The CyberSuite LED Keypad is capable of controlling a slave network
of up to 4 other CyberSuite Keypads in Slave Mode (see Device
Options for configuration).
Each slave reader device communicates with the keypad via
connection of their primary network lines to the secondary network
lines of the master keypad, as shown below. Note that the Slave
Reader Network Enabled option must be OFF to allow use of the
slave keypad network.
Figure 12 – Slave Keypad Wiring to Master Keypad