User manual

User Manual
• Refer to section 5.0 of this user manual regarding recommended storage and operating
conditions for the unit
• Refer to sections 6.0
of this user manual regarding troubleshooting of the unit
• Refer to section 7.0
of this user manual regarding improper use of the unit
1.6 Preparation for Use
• Carefully remove the unit from its packaging
• Please check that the unit and its accessories match the packing contents in section 1.4
of this
user manual
• Please read this user manual thoroughly familiarising yourself with the unit
• Place the unit on a protected work surface and carefully slide open the keyboard drawer
noting the friction stops on the slides to prevent movement of the keyboard whilst in use
• Carefully slide open and lift the LCD screen to a convenient viewing angle
• Plug up the DC power supply, whilst noting that the green LED on the external adaptor
should now be lit
• You should now be able to see the LED lights on the unit functioning you could also follow
section 2.0
to familiarise yourself with the OSD (On screen display) of the unit
• After removing the DC power input, carefully install the unit into the rack, noting section
1.5
of this user manual - important information and safe guards, and plug in all connecting
hardware (ensure all connecting hardware is powered down for this stage of the install)
• Further information regarding the use of this unit can be found in the following sections of
this user manual
www.austin-hughes.co.uk
Page
4