User manual

P. 7

1.10 How to Install "One Man" Installation Slides Chapter 1

Install into rack

■ Attach the mounting bracket to vertical mounting rails.

■ Adjust the rear mouting bracket to ﬁ t your rack.

■ Repeat the above steps for the other side.

Caution : Leaving the screws slightly loose (Not

release).

■ Pick up the chassis.

■ Insert inner members of slides into the already mounted

internal slide members in the rack.

■ Pull the black arrow button on each slide that is installed

on the LCD keyboard drawer to unlock (Push at the

same time).