User Manual Matrix Cat6 KVM MU-IP1613 / 1624 MU-IP3213 / 3224 Matrix Cat6 KVM MU-1602 / 1603 / 1604 MU-3202 / 3203 / 3204
Legal Information First English printing, October 2002 Information in this document has been carefully checked for accuracy; however, no guarantee is given to the correctness of the contents. The information in this document is subject to change without notice. We are not liable for any injury or loss that results from the use of this equipment. Safety Instructions Please read all of these instructions carefully before you use the device. Save this manual for future reference.
Contents < Part 1 > Matrix Cat6 1.1 1.2 1.3 1.4 1.5 1.6 1.7 KVM MU-IP1613 MU-IP1624 MU-IP3213 MU-IP3224 Package contents KVM port & Cat6 dongle connection IP, Remote & Local console connection IP console setting KVM Cascade IP Multi-port connection to remote PDU Specifications P.1 P.2-3 P.4-5 P.6 P.7 P.8-9 P.10 < Part 2 > Matrix Cat6 KVM 2.1 2.2 2.3 2.4 2.
Before Installation ■ It is very important to mount the KVM in a suitable cabinet or on a stable surface. ■ Make sure the place has a good ventilation, is out of direct sunlight, away from sources of excessive dust, dirt, heat, water, moisture and vibration. Unpacking The KVM comes with the standard parts shown in package content. Check and make sure they are included and in good condition. If anything is missing, or damage, contact the supplier immediately.
< Part 1 > Matrix Cat6 KVM Matrix Cat6 IP KVM < 1.1 > Package Content MU-IP1613 / MU-IP3213 MU-IP1624 / MU-IP3224 • Matrix IP KVM unit x 1 • Mounting set w/ bracket & screws x 1 • Power adapter w/ power cord ( for KVM ) x 1 KVM unit Cy r be Vie w + Receiver box for remote console + Receiver’s power adapter w/ power cord P.
Local Console IP console x 1 Local console x 1 Remote console x 1 Remote Console 1 MU-IP1613 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 Power 1 MU-IP3213 1 2 MU-IP1624 out 32 31 30 29 28 27 26 25 16 15 14 13 12 11 10 9 24 23 22 21 20 19 18 17 8 7 6 5 4 3 2 1 in Cascade Local Console IP console x 2 Local console x 1 Remote console x 1 Remote Console 1 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 Power 1 2 MU-IP3224 32 31 30 29 28 27
< 1.2 > KVM port & Cat6 dongle connection Matrix Cat6 IP KVM USB Servers DG-100SD DVI-USB dongle USB CAT 5 / 6 cable max. 40 meters DVI-D Cat6 KVM port 32 31 30 29 28 27 26 25 16 15 14 13 12 11 10 9 24 23 22 21 20 19 18 17 8 7 6 5 4 3 2 1 PS/2 Servers USB Servers PS/2 VGA DG-100S VGA-USB dongle DG-100 VGA-PS/2 dongle CAT 5 / 6 cable max.
< 1.3 > IP, Remote & Local console connection Inter net Network device hub or router CAT 5 / 6 cable max. 100m Remote USB console Receiver CAT 5 / 6 cable max. 150m 2 Local USB console Remote Cat6 Console 1 32 31 30 29 28 27 26 25 16 15 14 13 12 11 10 9 24 23 22 21 20 19 18 17 8 7 6 5 4 3 2 1 1 Inter net Network device hub or router CAT 5 / 6 cable max. 100m P.
How to use a receiver to connect a remote console Receiver Local Computer Matrix Cat6 IP KVM Monitor Remote I/O Power USB K/B Local Mouse Remote Button to PC Button to KVM switch The receiver provides a hotkey function for remote console. Please refer to P.
< 1.4 > IP console setting After the cable connection, please take the following steps to configure the IP KVM : 1. Download IPKVMsetup.exe from the link: http://rackmount-solutions-pro.comp/utilities/ipkvmsetup.exe 2. Double click IPKVMsetup.exe to configure the IP KVM by device setup as below. 3. Click Refresh Device to search the connected IP KVM 4. Select the M.A.C. address, which you want to setup, then click Query Device 5. Enter Super user login. The default is super 6. Enter Super user password.
< 1.5 > KVM Cascade ■ ■ Matrix Cat6 IP KVM Cascade up to 8 levels, 256 servers Cascading multiple KVM by CMC-6 or CMC-3 cascade cable. Cascaded KVMs from level 2 to 8 must be the models of MU-1602 / MU-3202 or M-802 / M-1602. When multiple matrix KVMs cascade together, the master KVM at level 1 will take all control of other slave KVM switches (e.g. level 2 to 8).
< 1.6 > IP Multi-port connection to remote PDU CyberView IP KVM provides RJ-45 Multi port for the user to remotely control and manage servers & PDU together. CyberView Matrix IP KVM 32 31 30 29 28 27 26 25 16 15 14 13 12 11 10 9 24 23 22 21 20 19 18 17 8 7 6 5 4 3 2 1 Other band IP KVM can NOT connect InfraPower PDU Each RJ-45 Multi port connect max. 16 pcs of InfraPower PDU To Multi port 1st level PDU To LINK port of the 1st PDU LINK 2nd level PDU CAT.
< 1.6 > IP Multi-port connection to remote PDU Matrix Cat6 IP KVM To access the PDU GUI, please enter the IP KVM main page and select Remote Power > Start Service > Apply LINK 1 OUT PDU cascade port ON CURRENT (A) 2 225 Current display ON ■ 3 Dip switch 4 Reset button For rackmount PDU, 1 OFF ON DIP DIP 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 RESET 2 3 4 P.
< 1.
P.
Part 2. Matrix Cat6 KVM < 2.
Matrix Cat6 KVM Local Console Local console x 1 Remote console x 1 Remote Console 1 MU-1602 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 Power MU-3202 out 32 31 30 29 28 27 26 25 16 15 14 13 12 11 10 9 24 23 22 21 20 19 18 17 8 7 6 5 4 3 2 1 in Cascade Local Console MU-1603 Local console x 1 Remote console x 2 Remote Console 1 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 Remote-2 MU-3203 MU-1604 Remote-3 Local Console 32 31 30 29 28 27
< 2.2 > KVM port & Cat6 dongle connection USB Servers DG-100SD DVI-USB dongle USB CAT 5 / 6 cable max. 40 meters DVI-D Cat6 KVM port 32 31 30 29 28 27 26 25 16 15 14 13 12 11 10 9 24 23 22 21 20 19 18 17 8 7 6 5 4 3 2 1 PS/2 Servers USB Servers PS/2 VGA DG-100S VGA-USB dongle DG-100 VGA-PS/2 dongle CAT 5 / 6 cable max.
< 2.3 > Local console & remote console connection Matrix Cat6 KVM Receiver Remote USB console 3 Receiver Remote USB console 1 CAT 5 / 6 cable max. 150m CAT 5 / 6 cable max. 150m Remote Cat6 Console 3 Local USB console Remote Cat6 Console 1 32 31 30 29 28 27 26 25 16 15 14 13 12 11 10 9 24 23 22 21 20 19 18 17 8 7 6 5 4 3 2 1 Remote Cat6 Console 2 Receiver CAT 5 / 6 cable max. 150m P.
How to use a receiver to connect a remote console Receiver Local Computer Monitor Remote I/O Power USB K/B Mouse Local Remote Button to PC Button to KVM switch The receiver provides a hotkey function for remote console. Please refer to P.22 32 31 30 29 28 27 26 25 16 15 14 13 12 11 10 9 24 23 22 21 20 19 18 17 8 7 6 5 4 3 2 1 Monitor Remote Console Local computer ( Optional setup ) CE-6 Combo KVM cable VGA cable Cat6 cable up to 150m 12V DC Power Adapter P.
< 2.4 > KVM Cascade ■ ■ Matrix Cat6 KVM Cascade up to 8 levels, 256 servers Cascading multiple KVM by CMC-6 or CMC-3 cascade cable. Cascaded KVMs from level 2 to 8 must be the models of MU-1602 / MU-3202 or M-802 / M-1602. When multiple matrix KVMs cascade together, the master KVM at level 1 will take all control of other slave KVM switches (e.g. level 2 to 8).
< 2.
Part 3. Usage Matrix KVM Usage 3.1 KVM Button Power ON ■ Turn off all servers and KVM switches ■ Make sure all cables / connectors are properly connected ■ Recommend Power ON sequence is monitor, KVM switch finally computer Front Panel - Port LED Indications 16 ports Bank no. PC port LEDs Channel button Bank button 32 ports Bank no.
3.2 Password The password is enabled by default, the default password is “00000000” eight zeros (Do not use “0” on number pad) ■ Enable password 1. Press the KVM hotkey Scroll Lock + Scroll Lock + U 2. Logout the KVM by pressing the hotkey Scroll Lock + Scroll Lock + P 3. In SUPERVISOR level, enter “00000000” eight zeros in user name & password field (Do not use “0” on number pad) 4.
3.
3.4 KVM Hotkey & Remote Console Hotkey Matrix KVM Usage Local Console Hotkey Function Scroll Lock + Scroll Lock + Space Bar Calling OSD menu Right-button mouse + Esc Calling OSD menu Scroll Lock + Scroll Lock + Switch to previous port Scroll Lock + Scroll Lock + Switch to next port Scroll Lock + Scroll Lock + PgUp / PgDn Switch to previous bank or next bank Scroll Lock + Scroll Lock + Bank no. + Port no.
3.5 DC Power 12V, 24V, 48V Input Model Matrix KVM Usage 12V 24V 48V Input voltage: 12-Volt 24-Volt 48-Volt Input range: 9 ~ 18V 18 ~ 36V 36 ~ 75V - No load 50 mA 50 mA 50 mA - Full load 4950 mA 2450 mA 1220 mA Output voltage: 12-Volt 12-Volt 12-Volt Output current: 4.16A 4.16A 4.16A Efficiency 84% 85% 85% Input rating Input current Output rating Remarks: Package does not include power cord ■ P.
The company reserves the right to modify product specifications without prior notice and assumes no responsibility for any error which may appear in this publication. All brand names, logo and registered trademarks are properties of their respective owners. Copyright 2011 Rackmount-Solutions-Pro.com. All rights reserved.
