Instruction manual

5. OPERATION

○

PORT Setting: In the Camera ID Range, You need to select the port. To navigate and choose the

Baud Rate, push the joystick left/right or twist the joy stick clockwise/counterclockwise. If you

set the controller to RS-232, controller sends the data through the RS-232 port. If you choose RS-

485/422, it sends the Communication protocol through the OUT port.

Push the joystick left/right

CAM ID:[999 – 999]

PORT

or twist the joystick

COMM.:CYBER SCAN I

RS-485

clockwise/counterclockwise.

BAUD :9600 BPS

RS-422

→PORT :RS-485

RS-232

⑤ STORE THE CAMERA SETUP

CAM ID:[999 – 999] DO YOU WANT TO

Press ENT

COMM.:CYBER SCAN I SAVE ALL DATA?

BAUD :9600 BPS

1: SAVE 2: EXIT

→PORT :RS-485

Move the cursor to No.1

and Press ENT

DO YOU WANT TO

CHANGE COMPLETE..

SAVE ALL DATA?

1: SAVE 2: EXIT