User manual

Page 18 of 43 Cyber-Rain Manual Software Version 3.00
Click “Next” after entering your information.
The “Controller Setup” screen opens. Follow these steps:
a. Confirm that the serial number of your controller matches the serial number in your
documentation (also on the back of the Cyber-Rain controller). If there is a discrepancy,
contact Cyber-Rain technical support.
b. Give your controller a name (such as “Cyber-Rain Controller1” or “Joe’s Cyber-Rain”).
c. Each controller can control 1 to 8 zones. Select the total number of zones that you
activated when inserting the valve wires into the controller unit.
d. You can set your sprinklers to turn on 1 to 4 times a day. Select the number that
suits your needs, and then choose times for each watering cycle.
Note: You can change these settings at any time by accessing the “Setup Wizard” (see page 38).