User manual

Page 43 of 43 Cyber-Rain Manual Software Version 3.00
• If any category does not have “Full Control”, highlight that category and click the
“Edit” button.
• In the “Edit” window, click the box for “Full Control” under the “Allow” column.
• Click “Apply” and then click “OK”
Controller Not Recognized on New Computer or New Hard Drive
• Install the Cyber-Rain software.
• Cycle the power on your controller unit (unplug its power cable for 30 seconds,
then plug it back in).
• Your new installation of the Cyber-Rain software should now be able to recognize
your controller.
Access Point Diagnostics
• If all seven lights on the access point remain illuminated simultaneously, unplug
the access point and plug it back in.
Software Upgrade
• Go to www.Cyber-Rain.com/downloads and download the most recent version of
software.
• The upgrade process will erase your current watering schedule. If you would like
to save your current schedule, go to your local drive (usually C:\), and navigate
to "C:\Program Files\Cyber-Rain\Cyber-Rain\data".
• Within this folder you will find Cyber-Rain.xml (the .xml may or may not display,
depending on your operating system’s configuration).
• Copy this file (right click the file and click “Copy”) and save it someplace, such as
on your desktop (right click an empty space on the desktop and click “Paste”).
• Exit the Cyber-Rain software (File\Exit from the software window, or right click
the Cyber-Rain icon in the bottom right hand tray and click “Exit”).
• Enter the Control Panel from the Start Menu. Then click Add or Remove Programs
(in Windows XP) or the “Uninstall a Program” subcategory from the “Programs”
heading (Vista).
• Uninstall the Cyber-Rain software.
• Restart your computer
• Install the downloaded software
• Restart your computer
• Place the Cyber-Rain.xml file that you saved back in the C:\Program Files\Cyber-
Rain\Cyber-Rain\data folder, replacing the existing Cyber-Rain.xml file in that
directory.
• Plug in your USB access point.
• Start up your Cyber-Rain software.