User manual

Page 6 of 43 Cyber-Rain Manual Software Version 3.00
Manual Operation from the Controller Unit
Your Cyber-Rain XCI controller can manually activate individual zones directly from the controller
unit. After all zone wires have been installed, you may want to use this feature to check
that all zones are working properly. To manually activate zones, press the numbered button
that corresponds to the zone which you would like to activate. Each press of the button activates a
zone for 30 seconds. Pressing the same button additional times in rapid succession lengthens the
duration of watering for that zone in 30-second increments. To shut off the zone, wait 3 or more
seconds and press the button for that zone once.
3. Install the PC Software
Insert the Cyber-Rain Installation CD into the CD drive on your computer and double click on
the Cyber-Rain Installation program (Cyber-Rain.msi or Setup.exe). The following pictures
depict the installation procedure.
A Windows Security Warning screen may open. If so, click “Run”.