User's Manual

Initially Using
Cybird
Execute the following steps when you purchase and use the Cybird for the first time.
1. Power Connection to Cybird
Equip the main battery to Cybird. As the main battery may be discharged during transportation, combine the
main battery, and put the Cybird on the cradle after first combining the cradle with the power supply unit and
then supplying power.
2. Check operation of Cybird through the following processes.
1. The CYBIRDBANK logo appears on the screen for the first specified time (within 2 seconds) if you
press the “Power” button after connecting power to Cybird, and then the coordinate setup screen is
shown.
2. The cross (+) moves in the order of center→ left top → left bottom → right bottom → right top.
Coordinates adjustment is to control the recognition coordinates of the touch screen and you must
press exactly the center of the cross (+) along the indication (+) with the Stylus pen. For more detailed
information, see Chapter 3 Setting System Environment.
3. If you finish coordinates setting, the initial screen of Microsoft Windows CE appears. Now you can
use Cybird.
3. Setting Cybird Environment
Set the basic system on the control panel before using Cybird and make an optimum use environment. This step
may be performed during use later. Press the “Start → Setting → Control Panel” and set the environment. For
more detailed information, see Chapter 3 Setting System Environment.