User's Manual

Cybird On/Off
If you use the Power button on the right side of Cybird, you can simply stop or start again the Cybird. Cybird
stops if you press the Power button during use and the current operation state is preserved other than the data
communication (using the Internet). To start the work again, you just press Power button again and then the
details of the work at the time of stop are restored on the screen.
Using Hardware Buttons
1. Phone Key: brings the screen for a telephone call.
2. Record Key: brings the recorder screen if you press it once, and recording starts if you press it again. The
recording is completed if you press it during recording.
(Reference)
As the recorded data is stored in the memory as a file, you can listen to the recorded details at any
time. As stored in the memory as a file, recording time depends on the remaining capacity and recording type.
3. Power Key: is used to end or start work of Cybird. If power is on again, the screen to perform the previous
work appears again.
4. Navigation Key: performs the same functions with Up, Down, Left and Right keys on a general keyboard.
5. Enter Key: executes selected programs or items like the “Enter” key on a general keyboard.