User Manual

Getting Started Page 2-3
4. Speaker
A speaker built in PC-EPhone.
Does not operate when the headset jack is connected.
5. Navigation button
The four way direction buttons located on the bottom part of your PC-EPhone
allows you to quickly and conveniently move the cursor (up/down/left/right) when
selecting an icon or editing a document.
6. Enter button
Performs the same task as the “Enter” key on the common keyboard. In other
words, it is used to open a selected item.
7. Serial Port
Enables serial communication with your desktop PC through a serial cable.
Serial cable must be purchased separately.
8. Cover
A protective lid to protect the LCD screens.
The purpose of the cover is to protect the LCD screen. It does
not perform the functions of disconnecting communication
(voice and data communications) or converting your PC-
EPhone to the Sleep mode.
9. LED Light
The LED flickers with a Red light when a Hard Reset (Cold Booting) is performed
on your PC-EPhone. A steady Red light indicates that the recording program is
recording a voice message and shows that the system is in a normal running state.
When initially attaching the battery, if the booting logo does not
appear and the LED stays lit, check the battery connection and
the Battery Lock in the back. If the LED continues to light on,
despite a battery is connected in the right way, please contact
the Customer Support Center.