User's Manual

Getting Started Page 2-21
Select Numeral recognizer mode Convert entire area
Select Symbol recognizer mode
5) Diopen User Settings
When you tap the settings button in each Diopen mode, the following Diopen
Options dialog box appears.
Delay Time
When entering a symbol, if the next stroke is not made within the Delay Time, Diopen
proceeds with the recognition of the previous strokes. In addition, if the Delay Time
passes by after completing writing in Screen Recognizer, the writing ink is deleted. You
are able to set the Delay Time in mSec units, within the range of 100 ~ 5000(mSec).
The default Delay Time is set at 600 mSec.
Ink Width
Indicated the width in which your stroke is displayed on the screen. You can set it in
Pixel units within a range of 1 ~ 5(pixels). The default Ink Width is set at 2 pixels.
Ink Color
Select the color in which you wish your stroke to be displayed on the screen.
Keyboard Recognition
You can input characters by writing on the Diopen keyboard. If it is not selected, you can
only use the Diopen keyboard and not Handwriting Recognizer. The default settings
enable you to use Handwriting Recognizer on the Diopen keyboard.