User's Manual

Using your Majesty for the first time
Follow these steps to begin using your Majesty:
When your Majesty comes out from the factory, the Power-Cutting Switch is in the OFF position. If
you use it for the first time, more the Power-Cutting Switch toward the ON position with your
stylus.
Assemble the AC adapter, and connect it to the DC jack on your Majesty. Do not
disconnect your Majesty from AC power until the green Battery Charging LED
indicates that the battery is fully charged.
The battery may be drained during the transportation from the factory to the
consumer; therefore you should connect AC power to the cradle and place your
Majesty in it in order to charge the battery when using your Majesty for the first
time.