User's Manual

Getting Started Page 1-7
III. Soft Reset & Hard Reset
You can get your Majesty back to normal by performing a system reset when it is not
operating properly. There are 2 types of system resets:
Soft Reset , Hard Reset .
(1) Soft Reset
Performs Soft Reset when your Majesty operating system responds slowly or is
temporarily out of order. To perform Soft Reset, press the
Reset button on the back of
your Majesty using the stylus.
(2) Hard Reset
You can perform Hard Reset when the system does not return to proper operation even
after performing Soft Reset. To perform Hard Reset, push toward OFF the
Power-
Cutting Switch
of your Majesty with stylus and push it back toward ON. After performing
Hard Reset, device gives way to the touch screen calibration.
When you perform Soft Reset, you will lose unsaved data in all open
documents or programs. Be sure to save all data beforehand.
All data stored in RAM is lost as a result of Hard Reset, so it is best that you
store all RAM data in non-volatile storage devices (Local Storage, SD or CF
memory card, desktop’ s hard disk) before performing a Hard Reset.
.
Your Majesty will automatically perform Hard Reset when battery is fully
drained. This will result in a loss of all stored data and installed programs in
RAM.