User's Manual

Page 2-2 Ch 2
3. Execute (B) Button
User defines this button as another function. For more information on the definition
of Buttons, refer to the Define Buttons of Chapter 3 the Preference PC-EPhone. The
default is as follows :
Execute (B) : Connect Internet
4. LED Light (right side)
The LED flickers with a Red light when a Hard Reset (Cold Booting) is performed on
your PC-EPhone; when a Power Save Mode is on. A Power Save Mode is performed
with pressing down the power button on the right side of PC-EPhone for 2~3 seconds.
5. Microphone
Used for speaking in the voice recordings. The microphone does not operate when the
headset jack is connected.
6. Speaker
A built-in speaker in PC-EPhone. The microphone does not operate when the headset
jack is connected.
7. USB & Power Port
Connect your PC-EPhone to your desktop PC to transfer files or synchronize all PIMS
data, or connect your PC-EPhone directly to the external power source.
Note : the USB cradle must be plugged into an available USB port on the back of your
desktop PC.
8. LED Light (Left side)
A steady red light indicates that you device is being charged and a flickering green light
indicates that charging is finished.
9. Hotkey for System
①,②,③ : can be defined by user. Refer to the Define Buttons of Chapter 3 the
Preference for PC-EPhone.
The default is as follows :
Button I: help, Button II: Memo, Button III: Thin Client(MIWorld),
④ Opens the MP3 Player with just a tap of your stylus.
⑤ Opens the Task Manager with just a tap of your stylus.
⑥ Opens the Control Panel with just a tap of your stylus.