User's Manual Part 1
G
|˅GtG G XT[
6. Hot key(POZ Launcher) : Press to open POZ Launcher program. This program allows you
to easily open other program you want. When LCD is off, if you want to open POZ
Launcher, then change the settings, as follows : tap Start(
) button > Settings > System
tab > “System” icon > “Wake up” tab > select “Open program while in Sleep mode”. Also, if
you want to change the program assigned to each hot key, tap Start(
) button > Settngs
> Personal tab > “Button” icon > Program button tab and assign the program to any hot key.
7. Hot key(POZ Camera) : allows you to open POZ Camera program. When LCD is off, if you
want to open POZ Launcher, then change the settings, as follows : tap Start(
) button >
Settings > System tab > “System” icon > “Wake up” tab > select “Open program while in
Sleep mode”. Also, if you want to change the program assigned to each hot key, tap
Start(
) button > Settngs > Personal tab > “Button” icon > Program button tab and
assign the program to any hot key.
8. Hot key(GPS) : allows you to open MagicN browser. When LCD is off, if you want to open
POZ Launcher, then change the settings, as follows : tap Start(
) button > Settings >
System tab > “System” icon > “Wake up” tab > select “Open program while in Sleep mode”.
Also, if you want to change the program assigned to each hot key, tap Start( ) button >
Settngs > Personal tab > “Button” icon > Program button tab and assign the program to
any hot key.
9. Hot Key(NATE) : allows you to open imanPlus browser. However, you have to connect to
NESPOT AP first through NESPOT CM before using this browser. When LCD is off, if you
want to open POZ Launcher, then change the settings, as follows : tap Start(
) button >
Settings > System tab > “System” icon > “Wake up” tab > select “Open program while in
Sleep mode”. Also, if you want to change the program assigned to each hot key, tap
Start(
) button > Settngs > Personal tab > “Button” icon > Program button tab and
assign the program to any hot key.
10. Navigation key(
): Press to navigate through documents or open menu bar while
phone program is open.
11. Microphone: Speak into the microphone to record voice notes and communicate on the
mobile phone.
12. Charging state LED: indicates power state while recharging. (Blue : fully charged, Red :
charging)
13. phone keypad : allows you to input the phone number.