Datasheet

CyberData Corporation  3 Justin Court, Monterey, CA 93940  831.373.2601  Fax: [phone]  www.cyberdata.net
The IP Endpoint Company
The IP Endpoint Company
2-Port PoE Gigabit Switch
Features
 2-port auto-negotiating (no cross or cable
required)
 10.100.1000 full duplex (PoE-powered)
 Link/Status and connection speed LEDs
 RoHS compliant
The CyberData 2-Port PoE Gigabit switch is
designed to expand a single PoE network connection
into one or two PoE network ports.
Pass through PoE power
The CyberData 2-Port PoE Gigabit switch is powered
from a single 802.3at or 802.3af network switch and
passes that power through to one or two of the
downstream switch ports.
In the basic configuration, one of the Gigabit down-
stream ports can drive a VoIP phone directly with
PoE and the other Gigabit port can be connected
to a user’s PC.
No external power supplies would be required.
Technical Details
 All ports are 10/100/1000Mbps (10BASE-T,
100BASE-TX, 1000BASE-T) auto sensing
based upon the port's individual connection
 Each port has auto MDX - any port can be
used as the uplink connection
 Fully compliant to IEEE 802.3x standard
 Automatic address learning, address aging
and address migration
 Integrated lookup engine with 4k unicast MAC
addresses
Specifications
Dimensions
5.31” L x 3.03” W x 1.06” H
Ports
Warranty
Standards
IEEE
Modes 10BASE-T, 100BASE-TX, and 1000BASE-T
Input Power
Supplied by either 802.3at or 802.3af
LEDs Link/Status and Connection Speed
2 years
Unit Weight
0.56 lbs.
Operating temp. -10
o
C to 50
o
C (14
o
F to 122
o
F)
1 PD input port 802.3af or 802.3at
2 PSE port 802.3at (limited PD input)