User guide

CyberData SIP Paging Adapter Integration with MX (0000000400)
Revision 14 - August 2, 2013
© 2013 Zultys, Inc. No reproduction of distribution without permission
Page 14 of 25
Technical Publications
causes these amplifiers to turn on only
when audio is sent to them.
Click on the Save button to save your
configuration settings.
Note: You need to reboot for changes to
take effect.
When the Test Audio button is
pressed, you will hear a voice message for
testing the device audio quality and volume.
Click on the Test Relay button to do
a relay test.
Click on the Reboot button to reboot
the system.
8.3 SIP Configuration
SIP configuration screen is used to configure the SIP registration parameters used by the
CyberData SIP Page Speaker to register with the MX for paging purposes. The SIP User ID and
Authentication ID are the same values which is the Device ID created in the MX in section 6 and
assigned to the user created in section 6. Authentication Password is only used if a SIP Proxy
Password is required by the Generic SIP Device created in the MX.
If using MXNetwork with Redundancy it is suggested to add the redundant node to the backup
SIP server of the CyberData Paging Adapter, this way in a failover situation the paging equipment
will continue to function with no intervention. If you are using the pure multicast integration
method, this section may be skipped.