User guide

CyberData SIP Paging Adapter Integration with MX (0000000400)
Revision 14 - August 2, 2013
© 2013 Zultys, Inc. No reproduction of distribution without permission
Page 15 of 25
Technical Publications
Enable SIP Operation: Checked
SIP Server: IP or FQDN of the MX
Backup SIP Server 1: Only Used if using
MXNetwork with failover, then will be the IP
address or FQDN of the failover node. Will
dual register with the MXNetwork Node
Backup SIP Server 2: Not Used
Use Cisco SRST: Unchecked
Remote SIP Port: 5060
Local SIP Port: 5060
Outbound Proxy: must be left blank
Outbound Proxy Port: 0
SIP User ID: the Device ID created on the
MX in Section 6
Authentication ID: Same as User ID
Authentication Password: the SIP Proxy
Password for the Device ID created in section
6 (if required)
Register with a SIP Server: Checked
Re-registration Interval: 3600
Unregister on Reboot: Unchecked
Note: if checked will create an issue on
registration, and the device will fail to
register.
Buffer SIP Calls: Optional, if checked the
CyberData SIP Speaker will buffer the page,
and once the call is disconnected, it will make
the page.