Product specifications

Installing the VoIP Clock Kit Flush Mount Adapter
Verifying Operation of the Clock Kit Adapter
Operations Guide 930284G CyberData Corporation
13
2. After connecting power, you will see one of the boot-up messages indicated in Table 2-1.
Table 2-1. Clock Kit Boot-Up Messages
Message Meaning Action
8888 Normal start-up
message.
None.
Note: On the Clock Kit display, you will see the numbers 8888 for one second before
displaying the time that is in memory.
E01 Time error This would normally occur at manufacturing first Power On, or at subsequent Power On if
the battery was low or dead. If it occurs more frequently, contact CyberData support.
Note: If there is an Invalid Time Error, then you will see E 01 on the display for one second
and the time will be reset to 00:00.
E02 Low battery Replace the battery. See Section 2.3.3, "Replacing the Clock Kit Battery".
Note: If the Clock Kit battery is low, then at power up, you will see E 02 on the display for
one second before displaying the time that is in memory.