Product specifications
Table Of Contents
- Contents
- 1 Product Overview
- 2 Installing the VoIP V3 Indoor Intercom
- 2.1 Parts List
- 2.2 Intercom Components
- 2.3 Intercom Setup
- 2.4 Configure the Intercom Parameters
- 2.4.1 Factory Default Settings
- 2.4.2 Intercom Web Page Navigation
- 2.4.3 Log in to the Configuration Home Page
- 2.4.4 Configure the Device
- 2.4.5 Configure the Network Parameters
- 2.4.6 Configure the SIP Parameters
- 2.4.7 Configure the Nightringer Parameters
- 2.4.8 Configure the Sensor Configuration Parameters
- 2.4.9 Configure the Multicast Parameters
- 2.4.10 Configure the Audio Configuration Parameters
- 2.4.11 Configure the Event Parameters
- 2.4.12 Configure the Autoprovisioning Parameters
- 2.5 Upgrade the Firmware and Reboot the Intercom
- 2.6 Command Interface
- Appendix A: Mounting the Indoor Intercom
- Appendix B: Setting up a TFTP Server
- Appendix C: Troubleshooting/Technical Support
- Index

Product Overview
Product Features
Operations Guide 930500E CyberData Corporation
3
1.3 Product Features
The VoIP V3 Indoor Intercom has the following features:
• Supports SRST (Survivable Remote Site Telephony) in a Cisco environment. SRST parameters
are entered statically into the CyberData product's internal webpage.
• SIP compliant
• Dual speeds of 10 Mbps and 100 Mbps
• PoE 802.3af-enabled (Powered-over-Ethernet)
• Adaptive full duplex voice operation
• Network/Web management
• Network configurable speaker volume
• Network configurable door or intrusion sensor settings
• Network configurable relay activation settings
• Dial out extension supports the addition of comma delimited pauses before sending additional
DTMF tones
• Network configurable microphone input sensitivity adjustment
• Network downloadable product firmware
• Doubles as a paging speaker
• Call button
• Call activity indicator (Call Button LED)
Note An active call is indicated by the Call Button LED blinking at one second intervals.
• Tamper proof design
• Concurrent SIP and multicast paging
• Dry contact relay for auxiliary control
Note The relay contacts are dry and provided for a normally open and momentarily closed
configuration. Neither the alternate power input nor PoE power can be used to drive a door
strike.
• Autoprovisioning
• Configurable audio files
• Night Ringer
• Three year warranty
• Door closure and tamper alert signal
• Peer-to-peer capable










