Product specifications
Table Of Contents
- Contents
- 1 Product Overview
- 2 Installing the VoIP V3 Indoor Intercom
- 2.1 Parts List
- 2.2 Intercom Components
- 2.3 Intercom Setup
- 2.4 Configure the Intercom Parameters
- 2.4.1 Factory Default Settings
- 2.4.2 Intercom Web Page Navigation
- 2.4.3 Log in to the Configuration Home Page
- 2.4.4 Configure the Device
- 2.4.5 Configure the Network Parameters
- 2.4.6 Configure the SIP Parameters
- 2.4.7 Configure the Nightringer Parameters
- 2.4.8 Configure the Sensor Configuration Parameters
- 2.4.9 Configure the Multicast Parameters
- 2.4.10 Configure the Audio Configuration Parameters
- 2.4.11 Configure the Event Parameters
- 2.4.12 Configure the Autoprovisioning Parameters
- 2.5 Upgrade the Firmware and Reboot the Intercom
- 2.6 Command Interface
- Appendix A: Mounting the Indoor Intercom
- Appendix B: Setting up a TFTP Server
- Appendix C: Troubleshooting/Technical Support
- Index
Operations Guide 930500E CyberData Corporation
22
Installing the VoIP V3 Indoor Intercom
Intercom Web Page Navigation
2.4.2 Intercom Web Page Navigation
Ta b le 2-5 shows the navigation buttons that you will see on every Intercom web page.
Web Page Item Description
Link to the Home page.
Link to the Device Configuration page.
Link to the Ne
tworking page.
Link to go to the SIP Configuration page.
Link to go to the Nightring
er page.
Link to the Sen
sor Configuration page.
Link to the Mul
ticast Configuration page.
Link to the A
udio Configuration page.
Link to the Ev
ent Configuration page.
Link to the Autoprovisioning Configuration
page.
Link to the Update F
irmware page.
Table 2-5. Web Page Navigation