Product specifications
Table Of Contents
- Contents
- 1 Product Overview
- 2 Installing the VoIP V3 Indoor Intercom
- 2.1 Parts List
- 2.2 Intercom Components
- 2.3 Intercom Setup
- 2.4 Configure the Intercom Parameters
- 2.4.1 Factory Default Settings
- 2.4.2 Intercom Web Page Navigation
- 2.4.3 Log in to the Configuration Home Page
- 2.4.4 Configure the Device
- 2.4.5 Configure the Network Parameters
- 2.4.6 Configure the SIP Parameters
- 2.4.7 Configure the Nightringer Parameters
- 2.4.8 Configure the Sensor Configuration Parameters
- 2.4.9 Configure the Multicast Parameters
- 2.4.10 Configure the Audio Configuration Parameters
- 2.4.11 Configure the Event Parameters
- 2.4.12 Configure the Autoprovisioning Parameters
- 2.5 Upgrade the Firmware and Reboot the Intercom
- 2.6 Command Interface
- Appendix A: Mounting the Indoor Intercom
- Appendix B: Setting up a TFTP Server
- Appendix C: Troubleshooting/Technical Support
- Index
65
Operations Guide 930500E CyberData Corporation
Appendix A: Mounting the Indoor Intercom
A.1 Wall Mounting Components
Before you mount the Intercom, make sure that you have received all the parts for each Intercom.
Refer to the following tables.
Quantity Part Name Illustration
4 Sheet Metal Screw
4 Plastic Ribbed Anchor
Quantity Part Name Illustration
4 #6-32 FlatHead Countersunk Machine Screw
Table A-1. Wall Mounting Components (Part of the Accessory Kit)
Table A-2. Gang Box Mounting Components