User's Manual

Multiline IP Set Configuration
On the Mitel 3300 ICP, a SIP device can be programmed either in the User Configuration form or the
Multiline IP Set Configuration form and are programmed as a “Generic SIP Phone”. Enterprise Manager
can also be used to provision where this application is installed.
The Login PIN is the SIP authentication password and the username is the DN. The Number and Login
PIN must match the information in the Cyberdata VOIP Indoor Paging Speaker SIP device configuration.
All other field names should be programmed according to the site requirements or left at default.
Figure 2 – Multiline IP Set Configuration
Document #
09-5159-00034 Page 7