Product specifications

Installing the VoIP Intercom

Upgrade the Firmware and Reboot the Intercom

Operations Guide 930242F CyberData Corporation

7. Enter the IP address of your TFTP server into the TFTP Server IP parameter field.

8. Enter the firmware filename of the file to be uploaded into the New Filename parameter field.

For example, kernel filename 201-image-spk-sip.bin.

9. Click Upload File.

Note This starts the upload process. Once the Intercom has uploaded the file, the Uploading

Firmware countdown page appears, indicating that the firmware is being written to flash.

The Intercom will automatically reboot when the upload is complete. When the countdown

finishes, the Firmware Upgrade page will refresh. The uploaded firmware filename should

be displayed in the system configuration (indicating successful upload and reboot).

Note If you are upgrading an older version of the Intercom firmware to version 3.3.0 or later,

several features will be in an unknown or random state. Therefore, in the case of a firmware

upgrade to version 3.3.0 or later, CyberData recommends that you go to the Intercom Setup

page and make sure the following values are set properly.

• Auto Answer

• Activate Relay on Ring

• Activate Relay on Button Press

• Relay on Button Press Timeout

• Button Lit when Idle

• Play Ringback Tone

On the Sensor Setup page make sure that all of the settings are set properly.

10. Repeat steps 8 and 9 if you are uploading the Kernel and Application files.

For example, Application filename 201-romdisk-spk-sip.img.

Table 2-9 shows the web page items on the Firmware Upgrade page.

Table 2-9. Firmware Upgrade Parameters

Web Page Item Description

System Configuration Shows the current configuration.

BootLoader Shows the current boot loader filename.

Firmware Shows the firmware for partition 1 and 2.

TFTP Server IP Enter the TFTP Server IP address.

New Filename Use this field to enter the new file name for the kernel or

application firmware file that you are uploading.

Click on this button to automatically upload the selected

firmware and reboot the system.

Link to the Network Setup page.

Link to the Intercom Setup page.

Link to go to the SIP Setup page.