Product specifications

CyberData Corporation 930242F Operations Guide
Revision History
Revision Date Released Description of Changes
A 10/3/2008 This is the first release of the 010935B manual.
B 11/17/2008 Updated Figure 2-8.
C 12/8/2008 Updates Section 2.1.3, "Set up the Intercom".
Updates Figure 2-17 through Figure 2-24.
Updates Ta bl e 2 - 6 and Table 2-7.
Adds Table 2-8.
Updates Section 2.1.3, "Set up the Intercom".
Adds Section 2.1.5, "Configure the Sensor Setup Parameters".
Adds Note about upgrading the firmware to version 3.3.0 in Section 2.1,
"Upgrade the Firmware and Reboot the Intercom".
Firmware: This revision provides information for firmware version 3.3.0.
Release notes detailing the difference between this firmware version and
earlier firmware versions is available in the firmware zip file at the following
URL:
http://www.cyberdata.net/support/voip/intercom.html
D 1/6/2009 Updates Section 2.1.6.1, "Announcing the IP Address".
Updates Section 2.1.6.2, "Restore the Factory Default Settings".
Changes firmware version number to 3.3.2.
E 3/11/2009 Adds Section 2.1.4.1, "Point-to-Point Configuration" and the following note:
“Receiving point-to-point SiP calls may not work with all phones.”
Adds Figure 2-21, "SIP Setup Page Set to Point-to-Point Mode"
Updates Section 2.1.5, "Configure the Sensor Setup Parameters" to add
information about sensor setup options.
F 5/27/2009 Adds Section 1.7, "Dimensions".