Operation Manual

27
Importing Media into the Library
import the selected sound clips into your current project.
Recording Audio
In CyberLink AudioDirector you can record your own custom audio in the WAV
format, which is added directly into the timeline. The audio that is recorded is
placed onto any existing audio in the timeline.
To record audio, do this:
1. If required, click on to open and configure the recording settings. See
Recording Settings for detailed information.
2. To begin recording audio, click .
3. Click again to stop recording and save/import the recorded file into the
CyberLink AudioDirector library.
Recording Settings
Set your recording settings as follows:
Input source: select the import source or audio device you want to use to
record audio with.
Monitor input: set this option to On if you want to hear the import source
during the recording. If set to Off, you cannot hear the input source during
recording.
Countdown timer: select this option to enable a countdown before CyberLink
AudioDirector begins recording audio. Set the length of the countdown
(maximum 30 seconds) in the field provided.
Click OK to save any changes you make to the recording settings.