Operation Manual

61
Restoring Audio
to play the original audio.
3. Click Apply to repair the selected audio.
Manual Attenuate
The manual attenuate function lets you manually level off the selected audio so
that it has the same attributes as the surrounding audio.
To apply manual attenuate, do this:
1. Select the Manual attenuate function.
2. Use the Strength slider to set the amount of attenuation you want to apply on
the selected area.
3. In the Direction drop-down, select whether you want to level off (attenuate)
the selected area to match the attributes horizontally (above and below) or
vertically (left and right) around it.
4. If required, you can preview the repaired audio by selecting Restored result
and then clicking the play button. Select Original audio if you want to play
the original audio.
5. Click Apply to repair the selected audio.
Volume Adjustment
Use this function to manually repair the selected audio by adjusting the volume, or
amplitude.
To repair with volume adjustment, do this:
1. Select the Volume adjustment function.
2. Use the Volume slider to adjust the volume of the selected area.
3. If required, you can preview the repaired audio by selecting Restored result
and then clicking the play button. Select Original audio if you want to play
the original audio.
4. Click Apply to repair the selected audio.