Operation Manual

69
Producing the Audio
Producing the Audio
Chapter 8:
The last step when editing, restoring, and mixing audio files is to save or produce it
to a new file. CyberLink AudioDirector uses the original media and then applies all
the specified changes to it, creating a new file, either in the same format, or in a
new file format if you prefer.
Note: if you have CyberLink PowerDirector 11 installed on your computer, you can
also select an edited file in the library and then File > Export Audio to
PowerDirector from the menu to quickly produce and export just the audio to
PowerDirector.
Supported Formats
CyberLink AudioDirector supports the production of audio files into the following
formats:
Audio: MP3, WAV, WMA, M4A
Video: H.264, MPEG-2, MPEG-4, WMV.
Producing Audio
When you are finished performing edits, adding effects, or restoring an audio file in
the library, you can save the changes and produce it as a new file. This produce
feature is also used when mixing down all the tracks in the Mix room, combining
them into a single audio file.
Note: you can also convert audio files in the library into other formats using this
feature.
To produce your audio file as a new file, do this:
1. Select the audio file in the library you want to save/produce, and then click
Produce in the AudioDirector quick bar above the timeline. The Produce
Audio window opens.
Note: if there is a video file in the Mix room, or it is an edited video file's audio that
you want to produce only, select Produce Audio after clicking the Produce
button.
2. Set the File information as follows: