Operation Manual

70
CyberLink AudioDirector
File name: enter in a new file name for the file.
Location: click on to set the location of the folder where the produced
audio is saved.
Format: select the format you want for the newly produced audio file from
the drop-down. See Supported Formats for information on the supported
audio file formats.
3. Use the Audio profile settings to set the quality of the produce file as follows:
Bitrate: if required, set the bitrate for the produced file by selecting it from the
drop-down.
Sample rate: set the sample rate of the produced file by selecting it from the
drop-down.
Bit depth: set the bit depth of the produce file by selecting it from the drop-
down.
Channels: set the number of channels the produced file will have. If you are
producing it as a WAV file, you can produce it with 5.1 or 7.1 channels, if
required.
4. Click on Produce. The file is saved to the folder location specified.
Note: the new file is also added to the library and is available for use in other
projects in CyberLink AudioDirector.
Producing Video
After you have edited the audio tracks of an imported video file, use the produce
video function to re-render the video with the updated audio applied. This produce
feature is also used when mixing down all the tracks in the Mix room, including a
video track, and then combining them into a single video file with the mixed audio.
To produce a video file, do this:
1. Select the video file in the library you want to produce, click Produce in the
AudioDirector quick bar above the timeline, and then select Produce Video.
The Produce Video window opens.
2. Set the File information as follows:
File name: enter in a new file name for the file.