Operation Manual

71
Producing the Audio
Location: click on to set the location of the folder where the produced
video is saved.
3. Use the Video profile settings to set the quality of the produce file as follows:
Video format: select the format you want for the newly produced video file
from the drop-down. See Supported Formats for information on the
supported video file formats.
Video profile: select the video profile, or video quality, of the produced file
from the drop-down.
4. Use the Audio profile settings to set the quality of the produce file as follows:
Audio codec: select the audio used on the audio portion of the file from the
drop-down.
Bitrate: if required, set the bitrate for the video's audio by selecting it from the
drop-down.
Sample rate: set the sample rate of the video's audio by selecting it from the
drop-down.
Bit depth: set the bit depth of the video's audio by selecting it from the drop-
down.
Channels: set the number of channels the video's audio will have. Depending
on the video file format and audio codec specified, you can produce it with
up to 5.1 channels, if required.
5. Click on Produce. The file is saved to the folder location specified.
Note: the new file is also saved and available in the audio library of CyberLink
AudioDirector.