Operation Manual

35
Photo
tagged, the photos are then categorized in the Faces section of the media library,
and included on Facebook if you choose to share them on the social media web
site.
Auto Tagging Faces
CyberLink MediaShow uses face recognition to auto detect and tag faces in your
photos. To have CyberLink MediaShow auto scan a group of photos for faces, do
this:
Note: you can quickly tag all the faces in some photos, or whole photo albums,
simply by dragging and dropping them on to the Faces section of the library side
bar.
1. Select the Faces section in the media library side bar.
2. Select the Tag Faces button.
Note: you can also select some photos or a whole photo album in the library and
then Edit > Tag Faces at the top of the media window.
3. Select which photos you want to tag faces in as follows:
Tag faces in all photos: select to scan and tag faces in all of the photos in the
media library. Select the Start button to begin the tagging process.
Tag faces in specified photos: select if you only want to scan and tag faces in
the photos in a specific media folder. Select Next to continue and then the
folders you want to scan for faces. Select Start to begin.
Note: select Tag faces in the media tray photos if you only want the program
to scan any photos that are currently in the media tray.
Continue previous tagging process: select this option if CyberLink MediaShow
already scanned some photos for faces, but you did not complete the tagging
process.
Note: if your computer's VGA card supports CUDA technology or DirectX 11, and
there are enough resources available, select Enable hardware support for
face analysis to reduce the time it takes to analyze your photos.
4. CyberLink MediaShow analyzes the specified photos for faces and then
displays the results in the Tag Faces window.
Managing Tagged Faces
After CyberLink MediaShow has analyzed photos, it groups similar faces together in