Operation Manual

CyberLink MediaShow

Create Disc Settings

Before you burn your created disc, you may want to configure the disc

settings. To do this, click on Settings in the Create Disc window and

then configure the settings as follows:

Disc Details

• Disc format: select the format of your disc. Your selection may be

based on the type of burning device you have installed in your

computer. DVD: creates a standard DVD disc; ACVHD: to create a

high-quality high definition video that uses the MPEG-4 AVC

(H.264) video codec and is burned to a DVD disc; Blu-ray Disc: to

create a high-quality high definition video that will play back on

a Blu-ray Disc player.

• Optical drive: select the burning device from the drop down

menu that you want to use to burn your disc.

• TV format: select the TV format (NTSC or PAL) for the region in

which you would like to produce your movie. This format should

correspond to the format of the region in which you plan to play

your movie.

• Video format: displays the format of the video that will be

burned to your disc. MPEG-2: standard definition format found

on most DVD discs, and therefore takes up less space; MPEG-4:

high definition video format, which requires more space when

burning. A Blu-ray Disc player or AVCHD player is required to play

back discs that contain this video format.

Note: For Blu-ray Discs you may select between the two formats, but for DVD

and AVCHD it is set automatically.

• Audio format: select the desired audio encoding for your

outputted disc’s audio.

• Aspect ratio: select the aspect ratio you want your video to be

displayed on your disc.

Note: For DVDs you may select between 4-3 or 16-9, but for Blu-ray Disc and

AVCHD it is set automatically to 16-9.