Operation Manual

Table Of Contents
36
CyberLink PowerDirector
Once undocked, you can:
click or to view your production at full screen.
click to minimize the preview window, and hide it so you can edit more
freely. Click on next to the PowerDirector logo to show the minimized
preview window.
click on to re-dock the preview window.
Previewing in 3D Mode
In the preview window you can enable 3D* mode to view the media in your
production, in 3D, while you work.
Note: for detailed information on adding and setting the source format of 3D
media, see 3D Media. * Optional feature in CyberLink PowerDirector. Check the
version table on our web site for detailed versioning information.
3D Configuration
Before you can enable 3D mode, you must first set your 3D display device.
To set your 3D display device, do this:
1. Select the 3D configuration menu underneath the preview window .
2. Select one of the following options:
select your 3D display type from the list, i.e. 3D-Ready HDTV
(Checkerboard), Micro-polarizer LCD 3D (Row-Interleaved), 120Hz Time-
sequential 3D LCD, HDMI 1.4 Enabled 3D TV, etc.
if you are not sure which type of 3D display you have, select the Auto
Detect 3D Mode option to have CyberLink PowerDirector detect it for you.
if you do not have a 3D display, select Anaglyph Red/Cyan mode and then
use anaglyphic (red/cyan) 3D glasses to view 3D content.