Operation Manual

Producing Your Movie
95
4 We recommend that you select the default Smart Video Rendering
Technology (SVRT) selection to save time. Refer to "Glossary" on page 145 for
more information on this selection’s properties.
Note: If the SVRT is grayed out, it might be that your movie is utilizing Master Audio or
Master Watermark or does not possess any MPEG files. SVRT is used optimally
with MPEG formatted files.
5 If you are an advanced user, you may click the second selection MPEG-1 Video
(Constant Bitrate).
 If you picked the second selection, click on the left drop-down menu and
choose the group of profiles you want to display, which will include
Default, Custom, or All.
6 After selecting a group, select the specific profile. Profile properties will be
displayed immediately below the chosen profile including the recommended
processing speeds of your system. If you want better resolution or quality but
at the expense of hard disk consumed, choose the higher quality or higher
bitrate profiles.
Tips: If you will be making your own VCDs (burning at a later time), choose a VCD
profile. For more information on television standards such as NTSC and PAL, refer
to "NTSC and PAL" on page 142.