Operation Manual

Chapter 9
106
3 We recommend that you select the default SVRT selection to save precious
time and render like never before!
Note: If the SVRT is grayed out, it might be that your movie is utilizing Master Audio or
Master Watermark or does not possess any DV AVI files. SVRT is used optimally
with DV AVI formatted files.
4 For the Profile field, click on the left drop-down menu to display the profile
group. The DV group consists of DV format profiles while the Windows group
is the uncompressed AVI format that will take up a large amount of hard disk
but is used for editing by some video editing software applications and also
writing to VHS tapes or for TV broadcast.
 For information on television standards such as NTSC and PAL, refer to
"NTSC and PAL" on page 142.
5 After selecting the profile group, select the specific profile with the right drop-
down menu. Profile properties will be displayed immediately below the chosen
profile. Click Details for more information on a specific profile. Click Next.
 To adjust and modify a Windows AVI profile, go to "Setting AVI Profiles" on page
110.
 If your FireWire connection is ready, your DV camcorder is on, and your DV
tape is in place, check Write to DV Tape to directly write your entire production
onto your camcorder’s tape. Click Next.
Note: The Write to DV Tape step will appear after your production is complete.