Operation Manual

Chapter 9
110
Setting AVI Profiles
You may set the parameters of DV and Windows AVI profiles. For more information
on the individual settings, refer to "Glossary" on page 145 for more information.
DV AVI Profiles
1 While in the Producing Movie process, after you have chosen AV I as your
video type, select DV from the AV I Vi d eo drop-down menu and select NTSC
or PAL from the drop-down menu to the right.
2 Click Settings...
3 The Type tab is the default. Select DV
AVI Ty pe I or DV AVI Type II,
depending on your preference. Refer to
"Type I" and "Type II" on page 149 for
more information.
4 Click on the Audio Quality tab.
5 Select Medium audio quality or High
audio quality, depending on your
preference.
6 Click OK to return to the production
process.
Windows AVI Profiles
1 While in the Producing Movie process, after you have chosen AV I as your
video type, select Windows from the AV I Vi d e o drop-down menu and select
the quality from the drop-down menu to the right.
2 Click Settings...
3 The Compression tab is the default.
Select a Compression Codec by clicking
on the drop-down menu. Refer to
"codec" on page 145 for more
information.
4 The Key Frame is unavailable to be set.
It is defined as a frame in a video
sequence that does not require
information from a previous frame for
decompression. The more the key
frames, the better the quality but at the
expense of disk space.