Operation Manual

Capturing Content
53
 If you clicked Analog Video Capture , click Video Setup to modify. The
default tab will be Video Setup.
 Click on the Capture Device drop-down menu to select the appropriate
video capture device installed on your system.
 Select the correct Capture Source. Usually, all the sources will have ports
located on the capture card. Make sure the connections are secure.
 If you selected Video Tuner, you may then select either CATV (if you have
a cable connected) or Antenna installed. Select a channel and click OK. To
set up your TV, click on the TV Setup tab. Find your location. For non-
tuner sources (e.g. S-Video or Video In sources), select the television signal
format. Click OK.