Operation Manual

Capturing Content
55
 If you selected Video for Movie Disc Production, select the Type of Disc, High
Speed or High Quality, and then the video format of the disc.
 After selecting a profile, you may click Comments... or Details... to find
out more information about the profile and CPU recommendation.
 Click OK when you are finished with the Video Setup.
Note: If the video display is blank after you have selected to capture video, be sure your
video device is functioning properly. Other possibilities may be that the connections
aren't set up properly or you selected the wrong input settings.
 Now, modify the Audio Setup if you are capturing audio by clicking on it
either in Video or Audio Capture. A dialog box will appear.
 Click on the Audio Device drop-down menu to select the appropriate
audio capture device installed on your system.
 For the Audio Input, select the right input source (selections here will
depend on your sound card manufacturer). Click OK.
 If you have an audio CD, select the Audio CD selection for the Audio
Input and an additional drop-down menu will appear to select the audio
track that you would like to capture/rip.
 You may select Rip selected CD track at highest speed in order to rip the
selected track into your HDD into WAV format. Click OK.