Operation Manual

Adding Titles and Transitions
79
6 To select a suitable Title Effect, select a title first and then click on the effect
thumbnail in the Library to select. An instant preview will be shown in the
Preview Window.
 Drag the Hold Time slider to determine the length
of static time for the effect. You can also set the
duration of the effect (in seconds) by using the up
and down arrows or by entering a value up to two
decimal places using your keyboard. By increasing
the Hold Time (represented by the blue bar), the static time for your title’s
effect (i.e. only the text without effects) will be increased and vice-versa.
Note: Each chosen title effect vary in terms of duration length.
 To minimize the duration of an entire title effect (i.e. you don’t want the
title effect to last the entire duration of the clip), click and drag the Mark
In and Mark Out sliders to the desired position. Or, position the
Time Slider at a designated point and then click Mark In or Mark
Out below the Preview Window. You can also drag any of the four
Mark In, Mark Out, and Hold Time borders to quickly change their
positions on the Time Slider bar. Use this feature to quickly change the
duration of the effect as well as when the effect appears and vanishes.
 The entire title effect setting (including the Mark In and Mark Out times
and the Hold Time) can likewise be dragged on the Time Slider bar. Use
this feature to quickly change the point in the video clip at which the title
effect appears and disappears.