Operation Manual

Chapter 8
92
Applying Image Color Filters
You may want to apply a color filter so that a specific color of the image file will
blend the background of the image with the foreground of the original file. This
option is available in the Picture-in-Picture and Master Watermark Modes.
1 With the file selected in the PiP Mode, click Eyedropper to apply the color
filter.
2 A dialog box will appear. Now, position the Eyedropper tool over the color you
want to filter out and then click once to select it. The color box on top displays
the current color the Eyedropper is positioned over. The lower box displays the
color that was last filtered.
 To select a color more accurately, you can Zoom In or Zoom Out
on the picture. You may also select a magnification level from the
drop-down menu.
3 Click OK.
4 Now, check Apply Color Filter by clicking in the box. To disable this function,
uncheck by clicking it again.
 Drag the Tolerance Level slider to extend the range of colors from the one
you have selected for the Color Filter option.
5 Click Apply when you are finished. Be sure to set your preferences for applying
to the Storyboard. Go to "Edit Preferences" on page 46 for more information.