Operation Manual

Appendix
209
SVRT2: When Can I Use it?
SVRT2 can be applied to video clips in the MPEG-1, MPEG-2, and
DV-AVI (Type I) formats. In the following conditions, clips (or
portions of clips) do not require rendering during production, and
SVRT2 can therefore be applied:
• The frame rate, frame size, and file format are the same as
those of the destination production profile.
• The bitrate is similar to that of the destination production
profile.
• The TV format is the same as that of the destination
production profile. For more information, see Set a Video
Clip’s Interlacing Format on p.92.
If all of the above conditions are met, SVRT2 can be used. Any clips
that do not meet the above criteria are fully rendered without SVRT2.
In the following conditions, clips (or portions of clips) must be
rendered during production, and SVRT2 can therefore not be
applied:
• Adding a title or transition effect
• Modifying the color of a video clip
• Audio profile does not match destination production profile
• Modifying the volume of an audio clip
• Merging two video clips (clips within 2 seconds before or
after the merged clips will be rendered)
• Splitting a video clip (clips within 2 seconds before or after
the split will be rendered)
• Trimming a video clip (clips within 2 seconds before or after
the trimmed clip will be rendered)