Operation Manual

Capturing Media
27
• Click to stop capture before completion.
6. Enter a name in the dialog box that appears. The clips you have
captured appear in the Captured Clips area.
Batch Capture
Batch capturing may seem intimidating, but in reality, it is an
incredibly convenient method of capturing multiple video clips
automatically. If you take a few minutes to familiarize yourself with
batch capturing, you will save yourself loads more time when you
capture video from your camcorder. PowerDirector scans your DV
for intervals (or allows you to set them manually), then captures
them in a batch using the intervals you created.
Automatic Batch Capture
Automatic batch capture is a quick way to capture scenes from a
video tape.
To perform an automatic batch capture, do this:
Note: Make sure your camcorder is in VCR mode before capturing.
1. Click to open Capture mode.