Operation Manual

CyberLink PowerDirector 6
180
• Deinterlacing: Check to create deinterlaced video.
Deinterlacing improves the quality of interlaced video when
displayed on a computer monitor, but does may degrade
video quality in other cases.
• Noise removal: Check to remove video artefacts. Only use
this option if it was not used during capture, as it can result
in slightly blurred video quality.
• High speed/High quality: Drag the slider to select an
acceptable setting between faster production speed with
lower video quality and higher video quality with slower
production speed.
4. Click the Audio tab and modify the audio option, if necessary:
• Audio compression: Select the audio compression type
from the drop-down list.
• Audio compression rate: Select a rate from the drop-down
list. A higher rate yields better audio quality, but results in a
larger file and increased production time.
5. Click OK to close the dialog box.
• To edit a custom production profile, click and edit the
necessary information.
• To delete a profile, click . A warning message appears,
asking if you want to delete the profile. Click Ye s . The profile
is deleted.