Operation Manual

Chapter 2: Pre-production
35
capturing all of the intervals you have checked. The video plays in
the preview window as you capture. The clips you have captured
appear in the Captured Clips area.
• Click Stop to if you want to stop the capture process.
10. Click Finished to return to Capture mode.
Manual Batch Capture
Using manual batch capture gives you more control over the capturing
process and ensures that the scenes you want to include are captured.
Manual batch capturing is recommended when you are sure which
scenes you want to capture and have a good idea where they are
located on the tape.
To perform a manual batch capture, do this:
Note: Make sure your camcorder is in VCR mode before capturing.
1. Click to open Capture mode.